If you are shopping for a Mitsubishi Evolution 9 front lip, the first question is not colour or price — it is whether the part was shaped for your car and where it attaches. This hub works through year, chassis and mounting-position decisions first, so that an Evo 9 carbon fiber front lip arrives with the right expectations already attached.
Pick the row that describes your car before you look at any part number. Every row below is limited to what the product page actually evidences — where the listing is silent, the cell says so instead of guessing.
| Year | Chassis | Trim | Compatible option | Note |
|---|---|---|---|---|
| 2006 | Mitsubishi Lancer Evolution IX | Not asserted on the product page | YCE79122L · DK Style carbon fiber front lip | Confirm via the Fitment Notes page |
| 2007 | Mitsubishi Lancer Evolution IX | Not asserted on the product page | YCE79122L · DK Style carbon fiber front lip | Confirm via the Fitment Notes page |
| Earlier generations | Lancer Evolution VII–VIII | Not asserted on the product page | Category placement only — MITSUBISHI → LANCER EVOLUTION 7-9 | Verify before ordering; the listing names 2006–2007 only |
| Unknown | Unconfirmed | Unconfirmed | No recommendation offered | Identify your generation first, then return to this matrix |
Trim-level confirmation (MR / RS / SE) is not asserted here. YC publishes only what the product page evidences: fitment for the 2006–2007 Mitsubishi Evolution 9, placement in the Lancer Evolution 7-9 category, and a carbon fiber DK Style front lip sold under part code YCE79122L. Anything outside that belongs in a written reply, not in a table.
Three parts, three attachment points. Knowing which one you are looking at prevents the most common “I ordered the wrong kind of part” conversation.
The quickest way to classify a front-end aero part is to follow where it meets the car. A lip hugs the lower edge of the bumper. A splitter projects forward from that line. A bumper extension replaces or overlays the bumper surface itself. The YCE79122L part is listed as a front lip for the 2006–2007 Evolution 9, so it belongs in the first group.
None of this changes what the product page claims. YC describes the part as enhancing aerodynamics and boosting stability while adding aggressive style — nothing stronger is stated, and no downforce, lap-time or track-testing figures are published.
Runs along the lowest edge of the front bumper and follows its existing contour, adding a defined line rather than a new plane.
This is the category YCE79122L sits in.
A flat element that extends forward from under the bumper line. It reads as a separate plane when you view the car from the side.
Not what YCE79122L is listed as.
A moulded panel added to the bumper body itself. It alters the shape of the bumper rather than the trim line beneath it.
A separate purchase decision.
“DK Style” is the shape designation attached to this Evo 9 front-end lip, sold under part code YCE79122L. It describes the profile of the part — how the lip sits and reads across the lower bumper — not a trim level and not a performance rating.
That distinction matters when you are comparing listings. Two lips can both be carbon fiber and both fit the 2006–2007 Evolution 9 while producing a visibly different front end, because the style designation changed rather than the material.
On the product page, the DK Style lip is presented as a carbon fiber part with an OEM fit, a durable design, and the stated effect of enhancing aerodynamics and boosting stability while adding aggressive style.
Find the scenario closest to your situation, then look at the fact that decides it. Each row ends in a concrete action rather than a general recommendation.
| Your scenario | Product fact to check | Decision |
|---|---|---|
| Daily-driven 2006–2007 Evo 9 with the standard front bumper | The listing names the 2006–2007 Mitsubishi Evolution 9 and states an OEM fit | Order YCE79122L and choose your checkout currency. |
| Car built for shows and meets; you want a more aggressive front end | The description states the lip adds aggressive style in carbon fiber | Select the DK Style carbon fiber lip as a visual upgrade. |
| Evo VII or VIII owner cross-shopping the same category | Category placement is LANCER EVOLUTION 7-9, but the part is named for 2006–2007 only | Verify chassis fitment with YC before ordering — do not assume. |
| Workshop or group buy covering several units | The page offers a Product Inquire route alongside Add to Cart and Buy Now | Request a quote through the Contact Us page. |
| You cannot confirm whether your car is an MR, RS or SE | No trim-level claim is published for this lip | Read the Fitment Notes page and ask YC for written confirmation. |
| You want a custom finish, a different material or OEM/ODM supply | The listing publishes carbon fiber only, with no finish or material options | Send a customization enquiry before ordering. |
Almost every wrong order in this category comes down to the same thing: the buyer matched the look before matching the car. The lip is named for one generation window — the 2006–2007 Mitsubishi Evolution 9 — and sits in the wider Lancer Evolution 7-9 category. If your car is outside that window, the correct move is a written fitment check, not a hopeful order.
A short transparency pass, so you know exactly which questions to ask before you click Add to Cart.
These are the only product claims the listing supports.
Use Product Inquire or the Contact Us page for any of these.
The identifiers that tie this page to the exact part, gathered in one place for quick reference.
| Product name | 2006-2007 Mitsubishi Evolution 9 DK Style Front Lip |
|---|---|
| Part code | YCE79122L |
| Style designation | DK Style |
| Material | Carbon fiber |
| Stated benefits | Enhances aerodynamics, boosts stability, adds aggressive style |
| Vehicle fitment | 2006–2007 Mitsubishi Evolution 9 |
| Category placement | MITSUBISHI → LANCER EVOLUTION 7-9 |
| Buy path | Add to Cart, Buy Now, or Product Inquire |
| Checkout currencies | Multiple options including USD, INR, AED and SGD |
Work down this list before you open the cart. It takes two minutes and removes almost every reason for a return.
Send the chassis, the quantity and the finish you have in mind. Trade orders, multi-unit purchases, custom work and OEM/ODM enquiries all go through the same route, and you will get a written reply you can quote against.
Keep adjacent product options together for a faster catalog comparison.
Redefine your 1993 Mazda RX7 with the Rocket Bunny Pandem BOSS kit. Features a retro front-end swap, wide fenders, and GT aero for a legendary JDM look.
View product
Explore 2008-2014 Subaru Impreza GRB GVB STI Front Fenders, featuring carbon fiber construction and a refined exterior appearance for your vehicle.
View product
Discover the 2000-2009 AP1 AP2 S2000 Carbon Fiber Hood, featuring a refined design and carbon fiber construction for a distinctive exterior upgrade.
View productthe product page names the 2006–2007 mitsubishi evolution 9, and the part sits in the mitsubishi → lancer evolution 7-9 category. if you own a different lancer evolution generation, confirm your chassis before ordering.
the listing describes it as a carbon fiber front lip with a durable design. it does not publish a weight, weave pattern or finish type, so ask yc directly if any of those details affect your decision.
dk style is the shape designation yc uses for this evo 9 front-end lip, sold under part code yce79122l. it describes the profile of the part — not a trim level and not a performance rating.
the description states that the lip enhances aerodynamics and boosts stability while adding aggressive style, with an oem fit. no downforce figures, lap times or track-testing claims are published.
no trim-level fitment claim is published on the product page. use the fitment notes page and contact yc with your vehicle details if you need written confirmation before ordering.
yes. use the product inquire link on the product page or the contact us page for workshop orders, group buys, custom finishes and oem/odm enquiries. checkout also offers several currencies, including usd, inr, aed and sgd.
